Wall Putty: How And Why to Use It?

 

There are options for the wall in the market. But, here we are discussing only wall putty; how and why to use it.

Wall putty

Wall putty applied by Painting Contractors Toronto is like a magical paste that can cover all the scars and digs of your walls. Apply putty before painting no one will ever know, what was inside. Mainly, wall putties are of two types; spackling and joint compound. Both have their features and one can use them according to their needs. The main base of differentiation between these two is project scope, drying time and shrinkage.

·         Spackle

Sparkle has the consistency of fluffy toothpaste. It is a mixture of gypsum powder and binders (sometimes mixed with a little vinyl) and is used by Painting Contractors Toronto to repair small dents and holes. It offers quicker dry time than any other putties and shrinks less. You can fill the holes in one coat and paint over it at the same time.

·         Joint compound

It is like drywall mud, used to fill bigger holes. It is a mixture of gypsum-and-water and has the consistency of cake frosting. It offers longer drying times and a tendency to shrink. You will need to wait at least 24-48 hours before painting.

How to apply a wall putty

As suggested by Residential Painters in the GTA, keep your putty always covered while you are not using it. Make the mud what you need for your job and work quickly. For drywall or plaster, or holes less than a half-inch, use readymade sparkle. Start by removing the loose drywall. Apply a thin coat of sparkle using a putty knife. Scrape off the extra sparkle. Let it dry. Apply another coat if needed. Sand gently to wipe up dust and apply paint.

Need to bigger holes, choose a mud putty with Residential Painters in the GTA that takes a quite long time to dry. Use a joint compound equipped with backing material made for aluminium that will give proper binding. 

Loosen the surface near the hole. Apply the mesh covering the hole properly. Smooth the surface. Let it dry. Apply another cost if needed. Same the surface and apply paint.